تصویر ثابت

Nexans, LANmark-OF Pigtail SC Singlemode TB LSZH 9/125 1m 12 Colo
  • Nexans, LANmark-OF Pigtail SC Singlemode TB LSZH 9/125 1m 12 Colours

Nexans, LANmark-OF Pigtail SC Singlemode TB LSZH 9/125 1m 12 Colours

Part Number: N121.4TCS
Brand: Nexans
Price :
Stock:
Available

Nexans, LANmark-OF Pigtail SC Singlemode TB LSZH 9/125 1m 12 Colours

Nexans ref. : N121.4TCS

  • Factory terminated fibre assembly
  • Tight Buffer pigtail: 1­2cm stripping in one action
  • Set of 12 pigtails with different jacket colours
  • Insertion loss per connection without splice: typical 0,1 dB; 0.25 dB maximum
  • 100 % factory tested
  • Compatible with LANmark­OF splice cassette with heat shrink protectors.

DESCRIPTION

Pigtail set characteristics

  • Fibre assembly to terminate cable with fusion splicing
  • Suitable for use in patch panels using splice cassettes
  • The pigtails can be stripped in one action over a  distance of 1­2cm
  • Jacket colours match fibre colours according to TIA/EIA­598­B
  • Jacket colours: Blue, Orange, Green, Brown, Grey, White, Red, Black, Yellow, Violet, Pink, Turquoise
  • 12 pigtails on a cardboard and wrapped in a bubblefoam

Fibre type

  • The LANmark­OF OM3 pigtails have LANmark­OF OM3 GIGAliteFLEX fibre inside.  This bend insensitive multimode fibre has a small bend radius of 7,5 mm and is compliant to IEC 60793­2­10, fibre model A1a.2b.   The pigtail jacket is Aqua.
  • The LANmark­OF OM4 pigtails have LANmark­OF OM4 GIGAliteFLEX fibre inside. This bend insensitive multimode fibre has a small bend radius of 7,5 mm and is compliant to IEC 60793­2­10, fibre model A1a.3b.  The pigtail jacket is Aqua.

  • The LANmark­OF SM pigtails have LANmark­OF SM GIGAliteFLEX fibreinside. These fibres are bend insensitive and compliant to ITU­T G.657.A1 and to IEC 60793­2­ 50, fibre model B6.a1. The pigtail jacket of the singlemode pigtails is yellow.

Compatibility and installation practices

  • Tight buffer pigtails are compatible with heat shrink splice cassettes (N890.090 and N890.095) with heat shrink protections (N890.021). Tight buffer pigtails are recommended to be used with tight buffer cables, i.e. with 900 um fibres. When using loose tube cables (250 um fibres) additional stress on the loose tube fibres should be limited as much as possible

  • Around the splice area the pigtail needs to be stripped till the cladding before insertion in the splice tool.

  • For proper alignment in the fusion splice tool the pigtail is fixed on the 900 um outer sheath. There is no need to strip the outer sheath of the pigtail on the place for fixation for getting a proper fixation

 

Technical Specifications
    Comments
    Send Comment